Pickup/RV/Spare-Tire Mount

Thule's Bed Rider is perfect for carrying bicycles in your truck's bed. It's comprised of a Thule telescoping aluminum crossbar and 2 Thule Low Rider mounts with locking quick releases. The telescoping design lets the Bed Rider fit small to full-size truck beds without drilling, and the Low Rider mounts hold fast keeping your bikes safe and secure. You can also add Low Rider mounts to carry additional bikes.

Want to carry your whole fleet or bring your buddies along for a ride? Add more bike mounts to your Thule Bed Rider (sold separately) with Locking Bed Rider Add-Ons.

Adjustable, multi-position ladder and lumber rack that carries up to 250lbs* and easily installs to most pick-ups. - Durable and strong, the ladder rack is made from 14-gauge, 1 1/2-inch welded steel construction - Accommodates various loads up to 37-inches with adjustable load arms - Resists rust and corrosion due to the rust-resistant e-coating - Finish is protected due to long lasting black powder coat - Quick and easy to install to most pick-ups with side rail mounting Technical Specifications: - Dimensions: 5 x 39 x 50 in - Maximum load: *Holds up to 250lbs/113,4 kgs when racks are properly installed and weight is distributed evenly. Vehicle limits may vary. Please check vehicle owners manual.

Thule's TracRac SR Base Rails allow your TracRac SR Overhead Rack to move easily into any position to accommodate different size loads up to 1250lbs. - Quick installation without drilling into the truck - Smooth sliding and adjustability due to custom fit base rail (Thule TracRac SR Overhead Rack sold separately) - Requires Thule TracRac SR Overhead Rack (sold separately)

Smooth sliding and adjustability due to custom fit base rail. - Quick installation without drilling into the truck - Requires Thule TracRac SR Overhead Rack (sold separately)

Easily mount, slide or reposition a crossover toolbox for quick access. - Works with Thule TracRac SR

Custom adapter for mounting Thule TracRac TracOne to the Toyota Tacoma 2005-2015. - Easy to install with drill-free mounting

Custom adapter with integrated toolbox mount for installing Thule TracRac TracOne to the Toyota Tacoma 2005-2015. - Easy to install with drill-free mounting

Custom adapter with integrated toolbox mount for installing Thule TracRac TracOne to the Toyota Tacoma 2016-present. - Easy to install with drill-free mounting

Easily mount a crossover toolbox to Thule TracRac TracOne. - Easy to install with drill-free mounting

Thule's TracRac Utility Rack is a sliding utility truck rack system that is designed to get the most carrying capacity out of utility trucks holding up to 1,250lbs. - Sliding racks adjust along base tracks to carry different sized loads and can be easily removed when needed - Protect different size loads with the aluminum load stops that adjust to the full width of the utility truck - Aerodynamic and quiet due to the integrated wind deflectors - Securely transport all cargo with the aluminum ARC cleats that provide additional tie-down points - Durable, corrosion resistant aluminum construction

The perfect rack for those occasions when you need to carry a rooftop tent, basket, or other equipment up to 600lbs. - Designed to fit most compact/full size pickup trucks - Rack is at the ideal height (16”) to easily access the truck bed and sits below cab of truck for improved aerodynamics - Easily mount the Thule Accessory Side Bar for additional gear hauling capacity (sold separately) - Wind Diffuser disturbs airflow to reduce noise and drag for improved fuel economy - Secure different size loads with adjustable aluminum load stops - No cutting or drilling and only limited assembly - SecureLock locks the rack to the truck with two One-Key lock cylinders (included) - Mounting brackets available (sold separately) for attachment to bed track system found on best-selling compact pickup Toyota Tacoma - Accommodates a variety of Thule accessories - Durable, corrosion-resistant aluminum construction

This sliding truck rack easily moves into any position to accommodate different size loads up to 600lbs and works with tonneau covers. - Sliding racks adjust to the length of the bed to carry different loads and can easily be removed - Ideal rack height (18”), allows for easy truck bed access, and sits below cab of truck for improved aerodynamics - Easily mount the Thule Accessory Side Bar for additional gear hauling capacity (sold separately) - Wind Diffuser disturbs airflow to reduce noise and drag for improved fuel economy - Secure different size loads with adjustable aluminum load stops - Thule TracRac Base Rails (sold separately) provide drill free installation and attach to the truck stake pockets - No cutting or drilling, and only limited assembly - Accommodates a variety of Thule accessories - Theft-resistant system locks rack to base rail (locking knobs included) - Durable, corrosion-resistant aluminum construction

Most decent mountain bikes these days come with 15mm through-axles up front. You have two options for mounting to a SeaSucker rack: use a somewhat-more-expensive Fork Up adapter, or use their dedicated 15/100mm fork mount. The 15mm fork mount is bolt-on, meant for riders who are always using their rack with their thru-axle bike. According to Seasucker's friend and MTB pro Macky Franklin: “The 15mm fork mount is perfect. So much steadier than using the adaptor.” If you’ve got a Boost front hub (15/110mm), make sure to get one of Seasucker's Boost Adapters (sold separately) to get the fit right.

If you’re riding a 20/110mm front hub, you have two options for mounting to a SeaSucker rack: use a somewhat-more-expensive Fork Up adapter, or use their dedicated 20mm fork mount. The 20mm fork mount is bolt-on and is meant for riders who are always using their rack with their thru-axle bike.

2019 Model Falcon comes standard with our Universal Huske Fork Mount upgrade, 9mm plugs and a quick release skewer. The Falcon is our pickup-truck-specific 1-bike carrier. It’s a fork-mount-style rack, with two of our powerful 210 lb pull-strength rated vacuum cups that will hold your bike to the back window of your pickup. Incredibly easy to install, removes in just seconds, all without marking your car. Specifications: - Holds 1 bicycle – up to 45 lbs. - Made for pickup trucks. - NOT FOR ROOFTOP USE. - 1/2” thick high-density polyethylene (HDPE) body for strength and durability. - One heavy-duty fork mount for 9mm dropouts. - Two 6-inch SeaSucker vacuum cups on body (210-pound pull-strength rated each). - Approx. 13-inch x 6-inch footprint. - Approx. 4 pounds What’s in the box: - Falcon 1-bike rack with standard 9mm fork mount. - 5g Lube Tube for vacuum pump maintenance. - Spare SeaSucker vacuum mount.

The HUSKE (HUb Standards Keep Evolving) is a universal fork mount that handles the most common fork mount standards of today and tomorrow. Interchangeable plugs (sold separately) are available for 9x100mm Quick Release, 12x100mm Thru-Axle, 15mmx100 Thru-Axle, and 15mmx110 Thru-Axle (Boost), with more sizes to come in the near future. The HUSKE comes standard on all SeaSucker 2019 racks (the following SeaSucker fork-mount racks can be upgraded: Talon, Mini Bomber, Bomber, and Falcon).

Give your bike first-class treatment on the way to the ride. Saris' Traps Single Track mounts easily on the floor of your cargo area or truck bed and holds 2 bikes. Included is mounting hardware for three Traps fork mounts (sold separately).

Having enough room for another bike is rarely an issue with Saris' Traps Triple Track. Simply lay it on the floor of your SUV or place it in your truck bed and add your choice of attachments. Your bikes are guaranteed a stable ride. The unique design allows bikes to be staggered or angled for hauling more bikes in a compact space. Fork mounts and wheel holders are sold individually to let you customize your Triple Track.

Having enough room for another bike is rarely an issue with Saris' Traps Triple Track. Simply lay it on the floor of your SUV or place it in your truck bed and add your choice of attachments. Your bikes are guaranteed a stable ride. The unique design allows bikes to be staggered or angled for hauling more bikes in a compact space. Fork mounts and wheel holders are sold individually to let you customize your Triple Track.