An adapter for Thule Front Wheel Holder to enable transport of bikes with 12-15mm thru-axles. - Enables transportation of wheels with 12-15 mm thru-axle forks
Spider cargo net that works with the Kuat cargo racks. This includes the Vagabond and Vagabond X.
Custom-fit for your SkinnyWarrior, the SkinnyWarrior Stretch Net’s an easy way to keep gear secure on rough roads. True to its name, the Stretch Net wraps around the SkinnyWarrior’s load to prevent loose gear from flying out—even on rough terrain. Made to fit the basket with or without the extension, it’s easy to position and hook into place for a secure hold. - Designed for the SkinnyWarrior with or without the extension - Keeps loose gear safe and secure, even on bumpy back roads - Weight: 1.09 lbs - Dimensions: L 55.00in x W 21.50in x H 0.25in - No assembly required
$39.95 - $44.95
18" or 24" split bottom surf rack pads fit Thule square bars and other square/round bars or Thule's AeroBlade bars, Xsporter bars, and most factory racks. - High density foam padding provides maximum surfboard or stand-up paddle board protection - No-fade UV resistant fabrics for long term durability - Sewn-in hook and loop straps and convenient bungee cinch-cord ends allow for fast and easy installation, removal and adjustment (tie-down straps sold separately)
$48.00 - $126.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Stretchable bungee surf straps secure different size surfboards, stand-up paddleboards, and sailboards to the vehicle roof rack for safe and secure transport. - Simple and easy to use cinching system keeps boards protected and stable during transit - Looped ends fasten securely around the vehicle’s load bars - No-fade UV resistant straps deliver long term durability
Made to fit Seasucker's Bomber and Mini Bomber bike racks – just swap the Add-On Front Wheel Holder for one of the fork mounts, and now your front wheel doesn’t have to ride in the trunk anymore. Elongated entry slots for the skewer allow the wheel to rest on the platform of the rack, providing additional stability when driving. Made for standard road, cross and MTB wheels, but requires the MTB Plugs (sold separately) to hold a 15/100mm or 15/110mm (Boost) through-axle. Made from .25-inch powder-coated aluminum. Fits all SeaSucker fork-mount racks: Talon, Mini Bomber, Bomber, and Falcon.
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Thule's Stretch Cargo Net is perfect for containing loose items in your rooftop basket. Sporting molded plastic hooks for quick, secure installation, this stretch netting easily holds multiple and odd-shaped items in place.
This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack. - Axle not included. Works with your bike's thru-axle - Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc. - Built-in safety tabs - Durable black powder-coat finish Product Specs: - Weight: 0.32 – 0.38 lbs. - Minimum Crossbar Spread 16in - Maximum Crossbar Spread 42in - Limited Lifetime Warranty
Patented adapter design allows you to carry 15mm front suspension forks on existing Thule and most other fork-mounted bike carriers. - Patented adapter design allows use of current bike carrier - Durable materials and construction for added stability - Designed and manufactured in the USA - Welded steel body
$59.95 - $74.95
Thule's Thru-Axle Adapter allows you to carry bikes with through-axle front forks on Thule and most other fork-mounted bike carriers.
Thule's Ride-On Adapter lets you turn your factory-installed roof rack into a great bicycle rack. It attaches quickly to the factory rails and accepts up to 2 Thule roof-mount bike carriers (sold separately).
Thule's Wheel On solves the problem of where to put your front wheel when your bike is on your roof rack. Plus, it helps keep the inside of your car clean, too.
LightenUp your path-and easily secure your light bar or a pair of spotlights on your LockNLoad platform rack and Yakima T-slot crossbars. Configurable in 16 different orientations, this bracket provides peace of mind when you head out on nighttime adventures. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Configurable in 16 different arm-mounting orientations. - Supports up to an 18-lb. light bar or a pair of 9-lb. spotlights. - Max light bar length 52" long, max light bar depth 5.25" (including heat sink). - Heavy-duty steel construction, with a durable black-zinc coating. - Fits LockNLoad platform rack and perimeter rails, Yakima JetStream, FlushBar, RailBar, HD Bar T-slots, and most other T-slot equipped platforms and crossbars. - Also accommodates light bars that don't secure from the ends. - Holds lights with 6/8/10 mm hardware, using included torx head hardware for enhanced security. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Specs: - Weight: 1.00 lbs - Dimensions: L 7.25in x W 2.00in x H 2.00in - Some assembly required, 30 minute install
Thule's XK3 Xsporter Rack Adapter makes your Toyota Tacoma compatible with Thule's revolutionary Xsporter truck bed rack system (sold separately).
Fitting kit required for fit of the Xsporter Truck rack to the Toyota Tacoma 2016-.
Built with the strength to keep heavy loads in place, our steel, t-slot Load Stops integrate with our new truck collection HD Bars, and most T-slot crossbars. The Load Stop, t-slot quickly installs and adjusts with the turn of a knob and includes integrated tie-down points to makes it easy to secure lumber, ladders, canoes and more. - Made from solid steel for many years of use - T-slot design for easy attachment and removal on our HD Bar, JetStream, and other standard t-slot crossbars - Simple, tool free adjustment is done with the turn of a knob - Built in tie-down points make it easy to secure gear - Handles up to 250 lbs. on our HD Bars, and up to 165 lbs. on Yakima JetStream, FlushBar and RailBar crossbars - Set of four - Weight: 4.00 lbs - Dimensions: L 4.50in x W 1.50in x H 6.50in - Some assembly required, 5 minute install
Get your blades out of the backseat and up on top where they belong. Easy to use and super secure, the TopGrip is a smarter way to carry your paddle and other gear. Attach it to any Yakima crossbar or our ShowDown mount and secure your paddle in the padded clamps. Voila! Your wet paddle is out of the inside of your car, riding safely, securely, and away from the dangers of slamming doors and clumsy passengers. Not a paddler? Use the TopGrip for axes, shovels, or other long items. Product Details: - A convenient and secure way to transport a paddle, axe or shovel on the roof rack - The double padded cradles close over any shaft 30-50mm in diameter - Fully lockable with the addition of 2 SKS locks (sold separately) - Includes hardware for t-slot attachment (for JetStream, FlushBar, RailBar), and MightyMounts for CoreBar and RoundBar - Also attaches to ShowDown to load and carry your paddle next to your boat - Sold as a pair of cradles to carry one paddle, axe or shovel, up to 9 lbs. - Simple, secure roof rack mount carries one paddle, axe or shovel up and out of the way - Double-padded clamps deliver a super tight hold without damaging your paddle shaft - Fits just about any paddle or other straight handled item from 30mm to 50mm in diameter - Carries items up to 9 lbs in weight - Easily attaches to Yakima JetStream, CoreBar, and RoundBar as well as most other t-slot crossbars - Mounts directly to ShowDown kayak/board mount - Add SKS (Same Key System) locks for added security (sold separately) - Sold as a pair to carry one paddle, axe, shovel or other long item - No assembly required - 5 minute install Product Specs: - Weight: 1.18 lbs - Dimensions: L 4.25" x W 2.00" x H 3.25"
Get your axes and shovels out of the backseat and up on top where they belong. Easy to use and super secure, the TopGrip OG is a smarter way to carry your long-handled gear. Attach it to either size OffGrid cargo basket, then secure your gear in the padded clamps. Voila! Your axe or shovel is out of the inside of your car, riding safely, securely, and away from the dangers of slamming doors and clumsy passengers. Paddle much? Use the TopGrip OG for paddles as well. Product Details: - OffGrid cargo basket accessory carries one axe, shovel or paddle up and out of the way - Double-padded clamps deliver a super-tight hold without damaging your gear - Fits just about any axe, shovel, paddle or other straight handled item from 30mm to 50mm in diameter - Carries items up to 9 lbs - Easily attaches to Medium & Large OffGrid cargo baskets - Add SKS (Same Key System) locks for added security (sold separately) - Sold as a pair to carry one axe, shovel, paddle or other long item Product Specs: - Weight: 0.93 lbs - Dimensions: L 4.25" x W 2.00" x H 3.25"
A premium, universal wheel fork for the new bike axle standards. The universal SpinVice clamp works on most crossbar shapes and is compatible with an SKS lock. - Folds down when not in use - Universal bar attachment with SpinVice clamps - Double wheel retention with axle and ZipStrips - Lockable to crossbars (accepts one SKS lock) - Works with all new wheel and axle sizes TECHNICAL SPECS - Weight: 2.30 lbs - Dimensions: L 19.00” x W 5.00” x H 9.00”
Fully lockable multipurpose holder for carrying paddles, oars, and masts. - Fully lockable holder for paddles, masts, oars, and other similar sized items. - Fits items up to 4 inch/10 cm diameter - Capacity to transport and lock multiple paddles - One Key System - can be locked, lock (1) sold separately - Equipment protection provided by rubber cushion - Fits Thule square, xsporter, rapid aero, and professional series bars, round bars, and most factory installed cross bars - Integrated cable secures items and deters theft of expensive paddles
Now racking up ladders, lumber and other lengthy gear supplies is a lot easier. Yakima’s new Ladder Roller attaches to our Truck Collection HD Bars and most any T-slot crossbar. - Steel brackets with durable black powder-coat finish for many years of use - Wide 24" (615mm) roller footprint for easy loading of a wide range of gear and equipment - Includes hardware for both our HD Bar and most T-slot crossbars - 75-lb. load capacity - Weight: 2.50 lbs - Dimensions: L 25.75in x W 4.75in x H 2.00in - Some assembly required, 5 minute install
Getting a flat's no problem when you secure a spare tire to the LockNLoad platform rack with this heavy-duty retention kit. The T-slot, drop-in style eyebolt hardware allows quick adjustment and removal. Sturdy stainless-steel ratchet straps take up the slack to hold most common size off-road tires in place for any adventure. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Holds 1 wheel with tire, up to 100 lbs. - Holds max tire size of 42 x 17R - Easily installs in minutes anywhere on your LockNLoad platform rack. - Includes heavy-duty hook straps with steel ratchets, cast-steel eyelets, and a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Specs: - Weight: 3.20 lbs - Dimensions: L 7.00in x W 5.00in x H 2.00in
Whether you're headed out for the weekend or a coast-to-coast odyssey, Thule's Outbound is the perfect travel companion. This soft-sided, weather-resistant rooftop accessory is spacious enough to carry your entire family's vacation gear, and tough enough to protect it out there on the open road. The laminate material is rugged and highly weather resistant, and the padded base protects your car's finish. Heavy-duty, double-stitched straps attach the cargo bag to your roof-rack crossbars or raised factory rails. Twin compression straps keep the load stable, minimize abrasion and noise, and improve aerodynamics. When you've gotten back home, the Interstate folds down for compact storage.
One person can load and unload a boat with this unique retractable arm that fits inside your Thule load bars. - Supports up to 50% of the kayaks weight and prevents vehicle contact - Integrated load stop prevents boat from sliding off bar - Holds nearly every kayak shape and size - Fits Thule square bar rack system only
Thule says their Fairing is a stylish roof-rack accessory that decreases noise and wind resistance. But we both know what you'll use it for: plastering it with all your stickers. That's okay, we do the same thing. This polycarbonate shield fits both square and Rapid Aero crossbars (sold separately), comes in several widths to fit a wide range of vehicles, and is built for rigidity to alleviate wind-slap.
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
Be prepared with this heavy-duty bracket that keeps a high-lift jack accessible, and which conveniently mounts near the LockNLoad platform's perimeter. Easily installs in minutes and suitable for all common jacks. Add your own padlock to the integrated lock loop for greater security. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details - Securely carries 1 high-lift jack with a 50 mm steel standard bar up to 35 lbs. - Heavy-duty stamped steel construction, with a durable black-zinc coating. - Fits the LockNLoad platform rack and most other brands of T-slot equipped platforms. - Installs in minutes with an included 5 mm wrench. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Add your own padlock to the integrated lock loop for greater security. - Limited Lifetime Warranty. Product Specs - Weight: 6.50 lbs - Dimensions: L 7.00in x W 3.00in x H 8.00in
Thule's Load Bars are a rock solid rack solution that come in 4 different widths to fit a huge range of vehicles.
Page 1 of 7 Next page