Parts & Accessories

$3.39
Replacement cone nut for Kink Senec pedals, includes cone, washer, and o-ring. Right and left side specific.

$3.39
Replacement cone nut for Kink Senec pedals, includes cone, washer, and o-ring. Right and left side specific.

$6.50
The Curve Sole Measurement Tool works in conjunction with the flat sole shims to correct the radius of flat sole shoes and prevent unwanted squeaking. There are 4 radius measurements, one per side, that measure the sole and indicate whether a shim is needed or not.
$7.99
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.

$9.00
Dimension Nylon Basic Toe Straps
-Durable metal buckle
-Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel)
- 450mm

$9.99
Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe.
- Kit includes eight 1mm traction pads and eight 2mm traction pads

$9.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.

$9.99
Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm shims.

$9.99
Dimension Toe Straps.
- Durable metal buckle
- Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel)
- 440mm length

$9.99
Raise the height of your child's pedal with pedal blocks featuring interlocking nylon(not wood)design with elastic rubber band closure. Rubber, ridged surface for grip and safety.

$9.99
IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action.
- 2pcs IGUS self lubricating bushing
- 2pcs O-ring
- 2pcs stainless shim washer

$9.99
Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness.
- 28pcs rear load pins
- 16pcs front load pins
- Tool included

$9.99
- Heavy-duty nylon toe straps with classic style steel buckles
- Narrow design fits most cage style pedals
- 460mm length

$10.00
- Nylon construction
- Intended for use with double-strap toe straps (sold separately)
- Includes mounting hardware
- 36 grams per pair

$10.89
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers.
- Compatible with Exustar cleat C01, C03, and C05
- Durable and flexible rubber
- Can be used with either floating or fixed position cleats
- Weight of only 14 grams/pair

$11.00
Dimension Mini Toe Clips
- Toe clips do not accept toe straps
- Sold as a pair
- Mounting hardware for the toe-clip is included

$11.00
Dimension Toe Clips and Straps Set.
Includes:
- 4 bolts
- 4 nuts (washers included)
- 2 nylon toe straps
- 2 toe clips

$11.99
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.

$13.00
Giant's AC Toe Clips and Straps includes two durable chrome-plated steel clips, mounting hardware and a pair of quality leather straps with chrome-plated steel buckles.

$13.59
Oversized, forged, and machined hollow spindle with a unique bearing-less design. No more bent spindles or blown out bearings.
TECH SPECS
- Compatible with Senec Pedal only
- Installation: 6mm Allen Key or 3/8" Ratchet Drive
- Weight: 4.2oz

$13.59
Oversized, forged, and machined hollow spindle with a unique bearing-less design. No more bent spindles or blown out bearings.
TECH SPECS
- Compatible with Senec Pedal only
- Installation: 6mm Allen Key or 3/8" Ratchet Drive
- Weight: 4.2oz

$14.95
Cleat screws are intended for proper installation of the Cleat Wedge. Designed to withstand high torque levels, creating a secure and reliable connection between the rider and the bike. Available in different lengths and styles to fit most pedal systems.
- 10mm SPD/MTB compatible cleat screws
- 4mm Hex countersunk M5x0.8
- Compatible with most 2-hole cleats
- Black oxide-coated carbon steel
- 25 pieces

$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer.
The kit includes:
- 8 × 1mm traction pads
- 8 × 2mm traction pads
Compatible with:
- Candy 7 & 11
- Model years 2016 – present

$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer.
The kit includes:
- 8 × 1mm traction pads
- 8 × 2mm traction pads
Compatible with:
- Mallet E
- Model years 2016 – present
Page 1 of 4
Next page