Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Stems

Ritchey SuperLogic C-260 Carbon Stem
$269.95
When stiffness and weight are the top on your list, you want Ritchey's SuperLogic C-260 Carbon Stem. This revolutionary design starts with a bar clamp that wraps a full 260-degrees around the handlebar to distribute clamping stress evenly through the handlebar, faceplate, hardware and stem body. Ritchey's first full-carbon stem, the C-260 features high-modulus carbon for stellar strength-to-weight ratio that translates into a solid but forgiving ride. And, the steer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube, so you can run carbon bars and a carbon steerer with no problem.
Ritchey Superlogic C260 84D Stem
$269.95
Ritchey's first full-carbon stem was designed to meet the needs of high-wattage European Classics specialists. The Carbon C260 adds to the amazing strength-to-weight ratio of our C260 alloy and Carbon Matrix stems through the use of high modulus carbon fiber, increased boom diameter, and a wider clamp. Gram-for-gram, this is the lightest, stiffest full carbon stem on the market, making it the most advanced Ritchey stem ever. - C260 bar clamp creates a larger stem-to-bar interface, drastically reducing bolt stress - 4 x T-20 faceplate bolts and patented 260-degree bar clamp design reduces weight, increases stiffness, and distributes stress more evenly - 3 x T-20 steer tube bolts and curved clamp slot reduces weight and steer tube stress - Fits most road and mountain bars - Material: Carbon with 2014 alloy faceplate - Length: 90mm - Angle: 84/6 degree - Stack: 42mm - Faceplate width: 42mm - Steerer: 1-1/8" - 125g (110mm)
Ritchey Trail Stem
$33.95
- C-220 degree extra-wide bar clamp improves stiffness and fits most riser bars - 3D forged 6061 alloy - 42mm steerer height with 41mm faceplate width - 142g (90mm)
Ritchey WCS C220 25D Stem
$89.95
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 25D Stem offers 25-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged and internally machined 2014 alloy body - CrMo faceplate bolts and patented 220 degree bar clamp design reduces weight, increases stiffness and distributes stress more evenly - Stainless steel steer tube bolts and curved clamp slot reduces weight and steer tube stress - 5Nm torque max on all hardware - Fits most road and mountain bars - Installs without the removal of levers - Angle: 25-degree - Stack: 45mm - Steerer: 1-1/8" - Faceplate Width: 40mm - Blatte finish - 120g (90mm)
Ritchey WCS C220 73D Stem
$89.95
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 73D Stem offers 17-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 73/17 degree - Stack: 45mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
Ritchey WCS C220 84D Stem
$89.95
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
Ritchey WCS C220 Stem
$89.95
The WCS C220 stem is easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. - The handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar - Bolt forces are aligned with the clamp so that the stem body embraces the handlebar which is less prone to damaging lightweight bars - Clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness
Ritchey WCS Carbon Matrix C220 84D Stem
$159.95
You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer: 1-1/8” - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)
Ritchey WCS Carbon Matrix C220 84D Stem
$159.95
You really can have it all-the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Stack: 42mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)
Ritchey WCS Carbon Solostreem Handlebar/Stem
$499.95
A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)
Renthal New Integra
$112.95
Renthal's revolutionary Integra stem combines high strength with ultra-low weight. The use of two independent, C-shape handlebar clamps allows the stem body material to be reduced to a minimum, while maintaining an incredibly stiff and strong structure. The ultra-wide, 64mm handlebar clamping area increases torsional rigidity and the use of just six bolts vastly reduces overall weight. In addition, the uninterrupted clamp on the underside of the handlebar eliminates stress risers found on most other clamps, which can lead to handlebar failure.
Redshift Sports ShockStop Stem
$149.99
An adjustable stiffness suspension stem that smooths out the ride by reducing the affects of impacts and road vibrations. - Unwanted vertical movement is absorbed by twin interchangeable elastomers - Stem retains torsional rigidity - Travel is limited to 1-2 centimeters - Made with 6061-T6 Aluminum - Includes 5 swappable elastomers (2 pre-installed, 3 additional) to customize the ride feel for your bike, weight, and riding style
Race Face Atlas DM 35
$99.99
The RaceFace Atlas 35 direct mount stem is an all new 2-piece direct mount design. Super lightweight, low profile design with flush mount bolts and 5mm spacers kit to let you dial in your perfect set up. - Machined from 2014 Aluminium - Weight-saving single bolt faceplate
Race Face Chester Stem
$54.99
- Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates ‘stress risers'
Race Face Turbine 35 Stem
$99.99
- Intended for XC, Trail and All Mountain use - Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Bar Clamp Diameter: 35mm - Stem Angle: -84 deg , +96 deg
Race Face Turbine R 35 Stem
$99.99
Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation
Promax Banger Stem
$49.99 - $69.99
Promax Banger stems have a front-load design and can be used with either side up, providing a 5-millimeter drop or rise. Available with 48-millimeter and 53-millimeter extensions, they are cold forged from the highest quality 6061-T6 aluminum then CNC machined to enhance the shape and further reduce weight. - Stack height: 30.5mm
Promax DA-1 Stem
$69.99
Promax's DA-1 XC mountain bike stem is 3D cold-forged, then CNC-machined from 6061-T6 aluminum to create a lightweight and strong stem. The two-piece faceplate features their bar-gripping DWT (Dynalock Web Technology), which increases the bar/stem interface.
Promax Impact Stem
$49.99 - $69.99
The Impact is Promax's top-load BMX stem. They come in 48-, 53-, and 60-millimeter extensions and are cold-forged from the highest quality 6061-T6 aluminum then CNC-machined to refine the shape and further reduce weight. The “open” design keeps weight low while maintaining plenty of strength and ensuring your bars stay put. - Weight: 9.8oz. - Stack height: 30.5mm
Promax S-29 Stem
$69.99
Developed for longer-travel trail bikes, Promax's S-29 stem offers the perfect configuration to set you up for maximum comfort and control. Featuring an oversize extension tube and faceplate with massive clamping area, it’s sure to keep your bars stylishly in place through the most demanding terrain. These stems are cold-forged and CNC-machined from 6061-T6 aluminum for strength, low weight, and durability.
Promax S-35 Stem
$69.99
Promax takes handlebar control up a notch with their S-35 Stem. Its oversize 35mm handlebar clamp cranks up the cockpit stiffness without adding weight or sacrificing any strength. - 3D cold-forged and CNC-machined from 6061-T6 aluminum alloy
Profile Design 1/Seventeen
$57.99
Simple, elegant, lightweight design can be run in negative or positive position for -17°/ 17° in rise. 3D forged 6061-T6 aluminum combined with a 4-bolt faceplate provides increased stiffness. - Weight: 162g (100mm) - Length: 70, 80, 90, 100, 110, 120, 130mm (±17°) - Material: 3-D Forged 6061-T6 Aluminum - Clamp Diameter: 31.8mm - Angle: 73° (±17°) - Steerer Tube Diameter: 11/8in - Stack Height: 40mm - Clamp Width: 40mm - Clamp Tourque: 5Nm - Finish: Matte Black with White Accents
Profile Design Aris OS Road Stem (+/-25-degree rise)
$49.99
Profile's Aris OS stem is a no-nonsense stem made from 6061-aluminum that's been shot peened and anodized for strength and durability. The 4-bolt faceplate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.
Profile Design Aris Road Stem (+/-25-degree rise)
$49.99
Profile's Aris stem is a no-nonsense stem made from 6061-aluminum that's been shot-peened and anodized for strength and durability. The 4-bolt face plate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.
Paul Component Engineering Boxcar Stem
$141.00
The Boxcar Stem from Paul Components is the perfect combination of stiffness, strength, and reasonable weight. All screws are high-strength stainless steel with the popular T25 head. Made in Chico, California with US-sourced 2024 aircraft alloy. - Stack height: 36mm - Weight: 155g (90mm)
Parlee Cycles Stem
$325.00
Parlee’s carbon stem is a masterpiece of strength, beauty and performance. It utilizes a 35mm bar clamp diameter that offers sharp steering precision while the two-part face plate is forged for longevity. Titanium bolts are mated to replaceable aluminum inserts throughout, protecting your investment from cross threading and other mechanical damage. - Weight: 125g
Origin8 Everland MX/GX Stem
$37.59
- High angle stems designed specifically for use with Monstercross or Gravel bikes equipped with off-road drop bars - Available in +25° and +40° versions and lengths from 60 to 130mm - 3D forged 6061 aluminum construction - Fork Dia: 1-1/8" - Bar Clamp: 31.8 - Color: Blk - Material: AL6061
Origin8 Flow MTB Stem
$37.59
- 3-D forged AL6061-T6 alloy construction - 40mm stack height - 4 bolt front loading faceplate design
Origin8 Flow MTB/Road Stem
$37.59
3-D forged AL6061-T6 alloy construction - 40mm stack height - 4 bolt front loading faceplate design
Origin8 Flux MTB Stem
$69.79
Full CNC machined AL6061-T6 alloy construction - 35mm stack height - 4 bolt front loading faceplate design