Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Your Search: "trainer"

Planet Bike Protege Rear Wheel Bracket - 130cm Wire & Hardware
$11.99
Wire harness and hardware to measure computer data based on the rear wheel - Contains bracket with 130cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties - Bracket fits most bars (25.4 to 31.8mm) - Compatible with: Protegé 5.0, 8.0 and 9.0 - Ideal for rear wheel indoor bicycle trainers
Kurt Kinetic Trainers Skewer
$12.00
Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width
CycleOps Trainer Skewer
$12.99
CycleOps' Trainer Skewer ensures your trainer will hold your rear wheel in place. Made of heavy-duty stainless steel, it will provide years of reliable use and keeps your high-end skewers pristine.
Giant Chopping Block
$13.00
Giant's Chopping Block lifts your front wheel so it's even with your rear wheel while on a trainer. It's compatible with 26-inch and 700c wheels and has a stable, anti-skid base.
Finish Line Absorb-It Mats
$13.99 - $29.99
The Finish Line Absorb-It Mat is the perfect way to keep any work area clean. Designed with special absorption fiber technology, the Absorb-It Mat absorbs and traps chain lubricants, cleaners, degreasers, brake fluid and hydraulic oils. The combination of absorption fibers and a leak-proof poly liner make the Absorb-It Mat perfect accessory when degreasing & lubricating bicycle chains. Use the Absorb-It on a work bench, under an automobile to catch leaking fluids, in a car trunk to prevent stains, in a chemical storage cabinets, or under a trainer to catch perspiration. The Absorb-It Mat comes in two different sizes: 48" X 18" and 60" X 36. The 48" x 18" will absorb and trap up to 11iter of fluids. The larger 60" x 36" will absorb and trap up to 2.5 liters of fluid. Both mats can be cut with a scissor to fit in custom areas.
Giant G-Thang
$15.00
Giant's G-Thang keeps corrosive sweat from harming your bike during an indoor training workout. It's made from soft, absorbent, washable terry cloth and is attached to your handlebars and top tube via elastic and Velcro straps.
JetBlack Riser Block
$15.99
JetBlack's Riser Block raises your front wheel to the same height as your rear wheel when on the trainer ensuring that your bike is level and stable. It's suitable for mountain and road bikes.
Kreitler Replacement Belt
$19.95
- Replacement belt - Select model based on model/roller size and belt size
CycleOps Leveling Block
$19.99
Leveling block for indoor trainers
Delta Tablet Extension Arm For Handlebars
$19.99
Extension Arm holds tablets at comfortable viewing distance. - For use with trainers and spin bikes only - Compatible with all Delta Tablet Holders (sold separately) - Premium aluminum construction - Instant attachment and removal - Rubber coated to protect stem and bars
Sunlite Dual Size Trainer Riser Block
$21.99
• Plastic riser block allows the position of front wheel at one of two heights
CycleOps Sweat Guard
$24.99
CycleOps' Sweat Guard is a valuable accessory for any trainer. It keeps corrosive sweat from harming your bike and home. It's made from soft, absorbent, washable terry cloth and is attached with elastic and Velcro straps. Two front pockets keep the remote, phone, or food close by while you're hammering away.
CycleOps Sweat Guard
$24.99
Keep corrosive sweat from reaching your frame while you're generating heat on your trainer. - Cell phone pouch included
CycleOps Trainer Clutch Knob Kit
$24.99
- Trainer Clutch Knob Upgrade/Replacement Kit - Compatible with all CycleOps Classic trainers that use an L bolt - Includes clutch knob, and L bolt.
CycleOps Trainer Clutch Knob Upgrade/Replacement Kit
$24.99
Includes clutch knob and L-bolt - Classic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt - Magnus Clutch Knob should only be used with Magnus Smart Trainer
JetBlack Trainer SweatNet
$24.99
JetBlack's SweatNet protects your bike and floor from corrosive sweat during your hardcore trainer sessions. You are sweating, right?
Giant Cyclotron Chopping Block
$26.00
Giant's Cyclotron Chopping Block supports and lifts your front wheel so you ride a level bike when you're on a trainer. It holds 700c and 26-inch wheels and has a stable, anti-skid base. It's made of ABS plastic for strength, low weight, and durability.
Kurt Kinetic Trainers Riser Ring
$26.00
Kinetic's Riser Ring lets you level your bike when you're riding on your trainer. Plus, there are 3 other steps that let you simulate climbing by elevating the front wheel. The Riser Ring is simple to use and stable for excellent support. • Designed for the following Kinetic trainers: the Road Machine, Magnetic, and Cyclone
ODI Cross Trainer Lock-On Mtb Grip
$29.95
- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)
BiKASE IKASE iPad or Tablet Mount for Trainers
$29.99
BiKASE's iKASE is ideal for holding iPads, other tablets, and similar devices on your handlebars for using them when you're riding on an indoor trainer. It has a protective clear covering that keeps the sweat off your tablet while allowing full functionality. It quickly and securely straps on and lets you exercise to music or movies, read books, catch up on email, and check the news and social media. The iKASE can be positioned for your preferred viewing angle and the tablet can be rotated between landscape and portrait viewing while mounted. • Material: 600 denier nylon • Size: 10 x 7.5-inches • Three Velcro straps on back for mounting • Many uses including car mount and easy to hold
CycleOps BlueGiga USB Dongle
$29.99
The BlueGiga dongle gives Rouvy, CycleOps' virtual training software, the ability to seamlessly connect to Bluetooth devices and sensors. The BlueGiga dongle contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including CycleOps smart indoor bicycle trainers and power meters made by the folks at PowerTap. Most importantly, the BlueGiga dongle is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth dongle for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.
CycleOps Climbing Riser Block
$29.99
CycleOps' Climbing Riser Block offers 3 levels of elevation to lift your front wheel and provide a workout simulating climbing hills. For steeper climbing workouts, 2 climbing blocks (sold separately) may be placed on top of each other for many different adjustment levels.
CycleOps Magnetic Remote Shifter
$29.99
CycleOps' Magnetic Remote Shifter is for use with CycleOps' standard Mag trainers. It allows you to adjust the resistance without leaving the saddle and fits on your stem or handlebars.
CycleOps RealRides Climb Indoor Trainer DVD
$29.99
Want to climb like a beast? The RealRides Climb Indoor Trainer DVD delivers a comprehensive 8-week training program that helps take your climbing ability to new heights. Robbie Ventura, form professional cyclist and professional coach, narrates, coaches, and rides with you as he takes you up one of the Tour of California's epic climbs, Coleman Valley Road. You'll see a dashboard with Robbie's power output in watts, heart rate, cadence, speed, intensity level and ride time. It's the perfect tool to help get you climbing stronger and faster. You can create custom training sessions and even toggle the video music off and listen to your own tunes as you train.
CycleOps RealRides Force Indoor Trainer DVD
$29.99
CycleOps' RealRides Force Indoor Trainer DVD gives you the knowledge and motivation for a great season. Renowned cycling coach Robbie Ventura guides you through a progressive 8-week training program that will increase your force on the bicycle. Video footage comes from on-bike cameras for a dynamic, action-packed feel and an in-video dashboard shows stats critical to your workout.
CycleOps RealRides RaceDay Indoor Trainer DVD
$29.99
CycleOps' RealRides RaceDay Indoor Trainer DVD gives you the knowledge and motivation for a great season. Renowned cycling coach Robbie Ventura guides you through a progressive 8-week training program that will increase your speed on the bicycle. Video footage comes from on-bike cameras for a dynamic, action-packed feel and an in-video dashboard shows stats critical to your workout.
CycleOps RealRides Ride 101 Indoor Trainer DVD
$29.99
CycleOps' Real Rides 101 Training DVD is a great introductory video for riders looking to build their cycling knowledge and on-the-bike skill set. Skill topics range from basic bike anatomy, handling skills, road safety and clothing, to bike maintenance, nutrition basics and how to ride in a group. Ride 101 also offers an 8-week training program with a series of skills and drills videos that will make you a better, safer, stronger and more confident rider.
CycleOps RealRides Strength Indoor Trainer DVD
$29.99
Your core is the launch pad for every athletic movement. A strong core allows for a strong cyclist. The RealRides Strength Indoor Trainer DVD offers an 8-week training program specifically targeted to building a more powerful cycling core. In this program, Robbie Ventura, former professional cyclist and pro-coach, alternates core-specific on-the-bike power intervals with off-the-bike core fitness speed work. Each segment consists of warm-up movements designed to increase flexibility and strength, followed by a timed speed-work routine. It's the perfect tool to build a balanced, stronger core.
Delta Mini Tablet Holder
$29.99
- For use with trainers and spin bikes only - Holds iPad Mini, Kindle Fire, Nexus 7, Samsung Galaxy 7 - Includes touch screen friendly splash-proof bag - Universal clamp attaches to all round bars up to 1.5" diameter - Viewing perspective can be set for preference - landscape or portrait - Instant removal and installation of device - Neat rubber bumpers grip and help cushion device - Mini-Tablet Holder max dimensions: - Holds devices with max dims 8.6" x 5.5" x .625" | 220 x 140 x 15mm (H x W x D)
Page 1 of 4 Next page