Parts & Accessories

- Pack includes 2 wheels straps and 2 road adaptors - The WS2 Thule Wheel Straps have a secure ratcheting buckle with a cam tightening mechanism.

This 53" long ramp, for use with Thule EasyFold XT, makes it easier to load and unload bikes, especially for taller SUV's and vans. Features - Quickly load and unload bikes from taller vehicles by adding this longer ramp (53") to the Thule EasyFold XT - Easily attach the ramp to the Thule EasyFold XT wheel tray using the tongue and groove connection

Custom adapter kit for mounting a Thule roof rack system to select vehicles. - Fits Subaru WRX/ WRX STI 4-dr Sedan with Fixed Points 2018 – 2020

Secure your boat's bow and stern quickly and easily. A simple ratchet system lets you do away with bungee cords and time-consuming knots. - Two rope ratchets with carabineer hooks for secure "peace of mind" closed loop latching to vehicle - Two 13’ heavy-duty rope lines and 4 hardened steel hooks for transport security

Custom fit kit for mounting a Thule roof rack to vehicles with flush railings. Fit cars - BMW X3 5-dr SUV with Flush Rails 2011 – 2017 - BMW 3-Series 5-dr Wagon with Flush Rails 2013 – 2019 - BMW X5 5-dr SUV with Flush Rails 2014 – 2018 - BMW X4 5-dr SUV with Flush Rails 2015 – 2018 - BMW X6 5-dr SUV with Flush Rails 2015 – 2020 - BMW X1 5-dr SUV with Flush Rails 2016 – 2020 - BMW X3 5-dr SUV with Flush Rails 2018 – 2020 - BMW X2 5-dr SUV with Flush Rails 2018 – 2020 - BMW X4 5-dr SUV with Flush Rails 2019 – 2020 - BMW X5 5-dr SUV with Flush Rails 2019 – 2020

A rooftop tent that auto-deploys and doubles as a cargo carrier. The ultimate hybrid system that combines a rooftop tent and cargo carrier all in one. Thule Basin pops up in under a minute and the hard-shell exterior makes this rooftop tent suited for harsh weather conditions. When closed, it not only doubles as a roof box, but also has a clean and sleek look. Easy-to-install mounting brackets let you lock the tent to your roof rack or platform for peace of mind. Thule Basin is compatible with all Thule Evo roof racks – make sure to check weight limitations for all feet and fit kits, as well as other roof racks. - Quick setup – under a minute - Pops straight up for maximum interior space - Converts to a cargo carrier

- Secures to any surface - Versatile fork mount block that secures to any flat surface and works with 9mm quick release forks and most thru thru-axle bikes. - Fork mount bike block mounts to any flat surface including pick pick-up truck beds - Securely transport bikes with 9mm quick release forks and thru thru-axle diameters 12x100, 12x110m, 15x100, 15x110 - Fork mount design clears disc brake calipers

Custom fit kit for mounting a Thule roof rack to vehicles with flush railings. - Fits Volvo XC60 5-dr SUV with Flush Rails 2009 – 2017

The Thule Xadapt 1 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid or Xsporter load bars. Please contact us with any questions regarding compatibility.

Custom-fit kit for mounting a Thule roof rack to vehicles with flush railings. - Fit kit for vehicles with flush railings - Comes as a package of four and helps attach a complete roof rack system to your specific car - Compatible with Thule Evo Flush Rail and Thule Edge Flush Rail foot packs - Check the Thule Buyer's Guide to find out which fit kit fits your car Compatible Vehicles - INFINITI: QX30 5-dr Hatchback with Flush Rails 2016 - 2020 - INFINITI: QX30 5-dr Hatchback (Glass Roof) with Flush Rails 2016 - 2020 - MERCEDES BENZ: GLA Class 5-dr SUV with Flush Rails 2014 - 2020

Custom fit kit for mounting a Thule roof rack to vehicles with flush railings. - Fits Mitsubishi Outlander 5-dr SUV with Flush Rails 2014 – 2020

Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge, and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 44-inch - Fits Thule AeroBlade - Fits Thule SquareBar

High-grade bike lock developed with ABUS High-quality lock for added security and protection against theft, developed with ABUS. The robust cable has a length of 150 cm and a thickness of 1,2 cm. The lock is compatible with both the two-bike and the three-bike carrier. Maximum security High grade bike lock with loop cable offers added security High quality bike lock for your bikes Developed with ABUS Easy to install Tool-free installation of lock to bike carrier

Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge, and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 38-inch - Fits Thule AeroBlade - Fits Thule SquareBar

Long loop strap provides anchor point for boat and load straps on vehicles without undercarriage attachment points. - Installs easily by placing under hood or trunk and is secured by the closed lid - Boat bow & stern tie-down loops that are fastened inside the vehicle hood or trunk hatch and protrude out through the edge to provide a secure loop to attach tie-downs to

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points or factory-installed racks. - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Check the Thule Buyer's Guide to find out which fit kit fits your car

Versatile, lockable kayak rack that carries one or two kayaks and folds flat when not in use. - Carry up to 2 kayaks - Folds flat after use - Pre-assembled

Custom adapter kit for mounting a Thule roof rack system to select vehicles. - Check the Thule Buyer's Guide to find out which kit fits your car

Custom fit kit for mounting a Thule roof rack to vehicles with flush railings.

Custom fit kit for mounting a Thule roof rack to vehicles with flush railings. Fit cars - Mercedes Benz E-Class 5-dr Wagon with Flush Rails 2017 – 2020 - Mercedes Benz C Class 5-dr Wagon with Flush Rails 2018 – 2019

Get cozy in your rooftop tent with custom-fitted cotton flannel sheets. - Sheets are custom-fitted to the size of the mattress - Includes one fitted sheet, one flat sheet, and two pillowcases - Mattress size: 72" x 96", 183cm x 244cm - Compatibility: Thule Tepui Explorer Autana 4

Get cozy in your rooftop tent with custom-fitted cotton flannel sheets. - Sheets are custom-fitted to the size of the mattress - Includes one fitted sheet, one flat sheet, and two pillowcases - Mattress size: 48" x 84", 122cm x 213cm - Compatibility: Thule Tepui Explorer Ayer 2, Tepui Low-Pro 2

Custom fit kit for mounting a Thule roof rack system to vehicles without pre-existing roof rack attachment points, or factory-installed racks.

Custom fit kit for mounting a Thule roof rack to vehicles with flush railings. - Fits Mercedes Benz GLC Class 5-dr SUV with Flush Rails 2016 – 2020

Get cozy in your rooftop tent with custom-fitted cotton flannel sheets. - Sheets are custom-fitted to the size of the mattress - Includes one fitted sheet, one flat sheet, and two pillowcases - Mattress size: 56" x 96", 142cm x 244cm - Compatibility: Thule Tepui Explorer Kukenam 3, Thule Tepui Explorer Autana 3, Tepui Low-Pro 3, Thule Tepui Ruggedized Kukenam 3, Thule Tepui Ruggedized Autana 3

Custom fit kit for mounting a Thule roof rack to vehicles with flush railings. Fits cars - KIA Sorento 5-dr SUV (Glass Roof) with Flush Rails 2016 – 2020 - KIA Sorento 5-dr SUV with Flush Rails 2016 – 2020

The HUSKE (HUb Standards Keep Evolving) is a universal fork mount that handles the most common fork mount standards of yesterday, today, and tomorrow. These interchangeable plugs fit into an anodized aluminum extrusion (sold separately). Suitable for all SeaSucker fork-mount racks: Talon, Mini Bomber, Bomber, and Falcon.

Boost front hubs exploded on the scene in 2015/2016 and SeaSucker needed a way to mount them to their 15mm Fork Mount. Lo and behold, this 15mm round, 10mm wide spacer they made works like a charm. Just insert your skewer through your fork and 15mm fork mount, then slip the spacer in between the far side of your fork and the fork mount before you finish pushing the skewer through and screwing it tight.

- For carrying unique frames on hang-on type car racks - Quick release clamp adjusts to fit between stem and seatpost - Rubberized hooks protect bikes finish

Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack - Provides a clean and sleek look for your Saris Bones rack - Upgrade your current Bones or Bones EX rack (pre-2022) - Compatible with: Bones or Bones EX racks - Not compatible to use with any Bones Hitch racks or SUPERBones